16 in 4 blade double spinner.
made from banner vinyl.
all colors spin in or out
from center.
01 December 2009
30 November 2009
12 in 4 blade DB
21 November 2009
DB 9 in blades X 3
02 November 2009
DB 9 in blades X 3
30 October 2009
DB 12 in 4 blade spr
16 October 2009
03 October 2009
12 in 4 blade double
02 October 2009
10 September 2009
new spinners 8 & 12 in
06 September 2009
8 in by 4 and 12 in by 4 blades
4 stripe is 8 in blades by 4
6 stripes is 12 in blades by 4
both are made from poly
sun screen materal. Have to
keep making one more I hope
as I am going to go Pacafic
Beach WA. For a three day
fun kite this next weekend
the 11,12,13 of sept should
be fun we get a lot of people
there. My big picture on
front page of blog was
taken there.
BOTH SOLD
6 stripes is 12 in blades by 4
both are made from poly
sun screen materal. Have to
keep making one more I hope
as I am going to go Pacafic
Beach WA. For a three day
fun kite this next weekend
the 11,12,13 of sept should
be fun we get a lot of people
there. My big picture on
front page of blog was
taken there.
BOTH SOLD
03 September 2009
30 August 2009
New 12 in 4 blade spinner
12 in 4 blade spinner in the
same poly sun screen materal
as the 24 in below except that
it has poly screen trim. Dark
sections are silver mix.
20 August 2009
BIG 24 IN blade spinner
05 August 2009
22 July 2009
Hi these are 12 in 4 blade doubles.
These spinners are made from solar
max nylon as could not get the shades
of color they wanted other wise.
As you can see on the R/W/B one.
I made some safty adds to it.
Slipe tie down in center to keep
it from lifting up and off. It has
14 in down rod but has come off
in high winds above 30 mph.It still
turns with washer around shaft.
Pins at the ends of shaft to keep the
blades from coming off. Pin in tube
of rod in down shaft to keep it from
coming out. He is going to put it
up on his busness best be carfull.
SOLD
These spinners are made from solar
max nylon as could not get the shades
of color they wanted other wise.
As you can see on the R/W/B one.
I made some safty adds to it.
Slipe tie down in center to keep
it from lifting up and off. It has
14 in down rod but has come off
in high winds above 30 mph.It still
turns with washer around shaft.
Pins at the ends of shaft to keep the
blades from coming off. Pin in tube
of rod in down shaft to keep it from
coming out. He is going to put it
up on his busness best be carfull.
SOLD
18 June 2009
8 in two blades time three
11 June 2009
8 in 2 blade times three
08 June 2009
8 IN BLADE SPINNER SINGLE
02 June 2009
8 IN BLADE SPINNER SINGLE
30 May 2009
8 IN BLADE SPINNERS DOUBLE AND SINGLE
09 May 2009
NEW 8 IN DOUBLE BLADE SPINNER
27 April 2009
NASCAR #3 FAN (12 IN BLADE)
Subscribe to:
Posts (Atom)